quality

Looking for high-quality solar? We’ve taken extra steps to ensure that our modules are second to none. We have rigorous in-house quality-control standards, and each module passes all the UL and IEC standards. We also invite the world’s leading third-party organizations to audit our facilities, test our products, and help us to refine our state-of-the-art manufacturing process. As a result, JinkoSolar is one of the most tested and validated brands, resulting in one of the lowest warranty claim rates in the United States.

BUILDING QUALITY FROM THE BOTTOM

THIRD-PARTY TESTING

We test at many third-party labs including PVEL in Berkeley and RETC in Fremont, California. Notably, we scored as an Overall Highest Achiever in RETC’s PV Module Index Report four consecutive times, and are one of only three manufacturers globally listed as Top Performer nine consecutive times in the PVEL PV Module Reliability Scorecard.

toughest under the sun

protects better

thick backsheet

Our modules are Fire Type 1 rated, resulting in thicker backsheets and far fewer failures. Other manufacturers’ backsheet failures range from 26% to 71% before end of warranty

Advantages of a thick backsheet

• Helps bifacial modules run cooler with a lower temperature coefficient.
• Offers more protection against abrasion.
• More impermeable to moisture.

hail resistance results

takes a hit

thick front side glass

Standard bifacial modules use thin, 2.0mm heat-strengthened glass to optimize cost and weight, JinkoSolar’s hail-resistant modules utilize thick 3.2mm tempered glass, withstanding strikes of up to 55mm (2.17”) hailstones.

weathers the storm

thick frame

Our modules pass the high-velocity hurricane (HVHZ) test, proving they can withstand hurricane-force winds. Test results for uplift (wind) on 2 XR100 IronRidge rails.

EAGLE^® G2 module (60 & 72 cell)

5400Pa test load (113mph/Category 3 hurricane)

EAGLE G2^® module (60 & 72 cell)

5400Pa test load (113mph/Category 3 hurricane)

DUPONT™ TEDLAR®

We have a strategic relationship with DuPont™, the inventor of Kevlar, to incorporate its strong, durable Tedlar® material into our module backsheets. Tedlar® is the only material proven to last more than 30 years in the field. Because backsheet failures represent a large problem in the field, many customers buy from JinkoSolar due to the proven materials we use. Since 2011, DuPont™ has been conducting worldwide field surveys to inspect, assess, and understand the state of degradation of PV modules with varying ages, bill of materials, and in a variety of geographies and climates all over the world. This survey included:

13+ million panels
630+ solar fields
4 GW total potential power production

Backsheet Defect Rates DuPont™ Tedlar® polyvinyl fluoride (PVF) film-based backsheet maintains the lowest defect rates—even after 35 years in the field.

research & development

R&D provides a competitive edge and plays a critical role in the success and sustainability of a business. JinkoSolar invests significant resources in R&D, and the results speak for themselves–multiple world records in power and efficiency.

SERVICE | SUPPORT

We have one of the lowest warranty claim rates in the industry. When there is a claim, we take it very seriously. If you are an owner, please contact your installer. If you cannot reach your installer or you were the direct purchaser of the modules, please let us know immediately by downloading this form and following the instructions.

DOWNLOADS | DOCUMENTS | ARCHIVED PRODUCTS

Datasheets, installation manuals, warranty, certifications, white papers, brochures, and more.